Team_LX 3 Posted February 27, 2015 Report Share Posted February 27, 2015 got this the other day was using it today and found a few issues 1) the undo/delete etc... if you right click does not work for me at all 2) Freezes so much for me where i have to close and reopen it 3) the align things do not work for me 4) Suggestion to add a ruler thing in it like a strait line too help align things Other then that works fine Quote Link to post Share on other sites
zenos 13 Posted March 2, 2015 Report Share Posted March 2, 2015 (edited) Hello Lazybotter,I always have huge problems with your tool. I have a big problem with my CPU that crash. I have tested with table instead of div (like you tool do) and my bot earn 50% of CPU usage with tables. But if I use tables, I have a lot of work to change all the divs into td/tr etc...I am loosing a lot of customers because of the CPU usage with the SSUB template.Is there a way to export my template with tables instead of divs ? Can you check if you can do something for me/us ? If my customers have less than an intel i5 or i7 (CPU) they cannot use my bot... This is not good for my business... I tought it was because of my ubot code, because this is a huge bot, but no... it comes from SSUB... I hope you can find a way to save me, I use SSUB because it makes very beautifull template, but if I cannot use them... If you need to be paied for that fix, this is not a problem for me, I just need to make it work. Thank you Edited March 2, 2015 by zenos Quote Link to post Share on other sites
steven.cross 0 Posted March 3, 2015 Report Share Posted March 3, 2015 Is there any way to center the UI to the middle of the bot when maximized? http://goo.gl/3Oa33a Thank you Quote Link to post Share on other sites
Team_LX 3 Posted March 4, 2015 Report Share Posted March 4, 2015 this is turning into something i think i should not have paid for so many issues more and more i use it more and more issues i find almost at this point i have to add an element and save then close the whole program and takes so long to reload after close just too get this too work for me Quote Link to post Share on other sites
zenos 13 Posted March 4, 2015 Report Share Posted March 4, 2015 (edited) Hello Lazybotter, I always have huge problems with your tool. I have a big problem with my CPU that crash. I have tested with table instead of div (like you tool do) and my bot earn 50% of CPU usage with tables. But if I use tables, I have a lot of work to change all the divs into td/tr etc... I am loosing a lot of customers because of the CPU usage with the SSUB template. Is there a way to export my template with tables instead of divs ? Can you check if you can do something for me/us ? If my customers have less than an intel i5 or i7 (CPU) they cannot use my bot... This is not good for my business... I tought it was because of my ubot code, because this is a huge bot, but no... it comes from SSUB... I hope you can find a way to save me, I use SSUB because it makes very beautifull template, but if I cannot use them... If you need to be paied for that fix, this is not a problem for me, I just need to make it work. Thank you [RESOLVED] OK, so , this is finilly coming from divs, this is a big bot and there are too many divs on it, someone told me on PM that he made his template with divs and with dreamweaver (not SSUB), he have the same problem with CPU So I found how to fix it, I don't use menu from SSUB, I use ubot's tabs and I export every panel with ssub and I put them on differents tabs on ubot (without toggle tabs and toggle navigation from SSUB). This is clearly better, from 100% CPU usage, to 30% on a old laptop computer (just opening the exported bot) Edited March 4, 2015 by zenos Quote Link to post Share on other sites
dankass 52 Posted March 4, 2015 Report Share Posted March 4, 2015 Cant seem to figure out why this is not working... don't think it has anything to do with ssub, but maybe someone has a workaround... I am trying to add an onchange event to a checkbox, but it does not trigger the define... I tried onchange and onclick and neither can I get working... it works just fine on a dropdown tho... or... maybe a whole different solution.... ultimately what I am trying to do is generate a list of all the checkboxes checked as they are being checked (example for color... red,black,blue) anyone have any ideas on this? Quote Link to post Share on other sites
zenos 13 Posted March 4, 2015 Report Share Posted March 4, 2015 Cant seem to figure out why this is not working... don't think it has anything to do with ssub, but maybe someone has a workaround... I am trying to add an onchange event to a checkbox, but it does not trigger the define... I tried onchange and onclick and neither can I get working... it works just fine on a dropdown tho... or... maybe a whole different solution.... ultimately what I am trying to do is generate a list of all the checkboxes checked as they are being checked (example for color... red,black,blue) anyone have any ideas on this?Do you do this like this ? Clicking the "check box", click the "Edit define to run" , choose the event and put your define name ? http://i.imgur.com/DyXzYoV.png http://i.imgur.com/0lBGDSC.png Quote Link to post Share on other sites
dankass 52 Posted March 4, 2015 Report Share Posted March 4, 2015 Do you do this like this ? Clicking the "check box", click the "Edit define to run" , choose the event and put your define name ? http://i.imgur.com/DyXzYoV.png http://i.imgur.com/0lBGDSC.pngYep, that's exactly what I did... I looked in the output code and I see it in there and added like it should, but for some reason it just wont run the define. Did it work for you? EDIT: I have no idea why... but my pc crashed, so I rebooted and now it's works fine... must have just been some memory leak or something else weird on my end... weird that the dropdown ones were working tho... Quote Link to post Share on other sites
Team_LX 3 Posted March 4, 2015 Report Share Posted March 4, 2015 Still having loads of issues and bugs was forced to go try out New Gen ui builder so far works fine lazy when you not being so lazy hit me up in a pm i would like some support . . . . . Quote Link to post Share on other sites
jamesfar 15 Posted May 8, 2015 Report Share Posted May 8, 2015 Guessing what dimension (width x height) when we compile is very frustrating Is there any plan to do what Kreatus suggest? Automatically show how much width and height we should use when compile our bot that used SSUB ? Quote Link to post Share on other sites
Brian. 0 Posted May 30, 2015 Report Share Posted May 30, 2015 Please help!!!!I've bought this and created a ui for my bot/program and i get this msg " Error: Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index Please can somebody help me ? im new to programming and as there are no training videos for SSUB im hoping someone will take pity on me. The bot runs great and sweet with the standard Ubot Ui's without the SSUB code. For the SSUB i had the button's Define command name to run setup as Search for Results. which is the name of the define in the Ubot code that the button should run Im Running Ubot Studio 4 Developer Quote Link to post Share on other sites
LazyBotter 188 Posted May 31, 2015 Author Report Share Posted May 31, 2015 Hi Brian, So you are trying to run a button "Search for Results", have to tested that the button or "Define" is working using an "Alert" command? A few people get confused when running buttons from the interface, see example: ui html panel("<button onclick=\"ubot.runScript(\'Button\')\">Button</buton>", 100) define Button { alert("Working!") } ui button("Button") { alert("Not Working!") } So you need to run the button from a "Define" not a "Ui Button" command... By the looking of the error you are getting, this is something with your UBot code, like your list has exhausted or something. ThanksCarl :-) Quote Link to post Share on other sites
Brian. 0 Posted June 1, 2015 Report Share Posted June 1, 2015 Hi Carl Thanks for getting back to me. I have set the Ui's button to run a define called "Search for Results" but when Iclick the button, I get the above error msg. yet when i ran it without the SSUB UI on the bot and click on a Standard UI button set to run the same Define it all runs sweet as a nut. so Im Confused. Quote Link to post Share on other sites
Brian. 0 Posted June 1, 2015 Report Share Posted June 1, 2015 (edited) Hi CarlThank you for your help. with your assistance I have found what I'm doing wrong. My define shouldn't have had a parameter in it. once i took the parameter out of the define then all ran sweet again. Thanks for your help. Edited June 1, 2015 by Brian. Quote Link to post Share on other sites
SaHiN 14 Posted July 1, 2015 Report Share Posted July 1, 2015 Hi LazyBotter icon problem, http://i.imgur.com/CE5sher.png Quote Link to post Share on other sites
whoami 26 Posted July 4, 2015 Report Share Posted July 4, 2015 Hello there, if I have a previous version is there a discount for this new one?Just asking before buying. Quote Link to post Share on other sites
MBG 7 Posted July 18, 2015 Report Share Posted July 18, 2015 hi,can anybody help me please, after creating html panel, i cannot compile a bot, i get this error:"offset and length were out of bounds for the array or count is greater than the number of elements from index to the end of source collection" thank you___________________________________ FIXED! an issue was compile settings - .ico icon format error Quote Link to post Share on other sites
steven.cross 0 Posted July 20, 2015 Report Share Posted July 20, 2015 Carl, your domain where u put the locker expired and now we can not use your sw. Check it please!Thanks Quote Link to post Share on other sites
tripros 16 Posted July 20, 2015 Report Share Posted July 20, 2015 Experiencing the same, my copy is saying invalid license, activations exceeded and won't let me run it. Please help!Thanks Quote Link to post Share on other sites
zenos 13 Posted July 20, 2015 Report Share Posted July 20, 2015 Experiencing the same, my copy is saying invalid license, activations exceeded and won't let me run it. Please help!ThanksSame here... Quote Link to post Share on other sites
jamesfar 15 Posted July 20, 2015 Report Share Posted July 20, 2015 me too Quote Link to post Share on other sites
rocket976 62 Posted July 20, 2015 Report Share Posted July 20, 2015 Experiencing the same, my copy is saying invalid license, activations exceeded and won't let me run it. Please help!ThanksSame same same Quote Link to post Share on other sites
mr.kim8692 2 Posted July 20, 2015 Report Share Posted July 20, 2015 me too, please updated buddy Quote Link to post Share on other sites
LazyBotter 188 Posted July 21, 2015 Author Report Share Posted July 21, 2015 Fixed! Sorry about that guys! I dident pay my bills! ThanksCarl Quote Link to post Share on other sites
v_ladimir 2 Posted August 4, 2015 Report Share Posted August 4, 2015 (edited) Hello,I bought the product but did not receive a letter on my paypal mailtranzaction 9S056648BN9856947Payment Id: AP-13P36499N8690935P Spam folder is empty Edited August 4, 2015 by v_ladimir Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.