pbsolution 4 Posted May 7, 2015 Report Share Posted May 7, 2015 Hello Dan,here the Licence Failure too! Not running at not one Machine anymore. Please correct this ! Mail send too.PeterPS: Must this be secured as Fort Knox? Its an really good Tool, but its really bad, ever when i need it, it doesnt run, and i must wait for an answer from Support. Quote Link to post Share on other sites
stanf 43 Posted May 7, 2015 Report Share Posted May 7, 2015 it failed again dan Quote Link to post Share on other sites
Bot-Factory 602 Posted May 7, 2015 Author Report Share Posted May 7, 2015 Will send you a pm guys with next steps. Quote Link to post Share on other sites
Bot-Factory 602 Posted May 8, 2015 Author Report Share Posted May 8, 2015 Hello Dan,here the Licence Failure too! Not running at not one Machine anymore. Please correct this ! Mail send too.PeterPS: Must this be secured as Fort Knox? Its an really good Tool, but its really bad, ever when i need it, it doesnt run, and i must wait for an answer from Support. it failed again dan @Stanf@pbsolution Your license has been resettet. I also added some additional monitoring to see if the hardware ID changes when you start the application again.I also sent you the Skype details of my developer. Please contact him. He will do a Netviewer session to analyze your problem. Kindest regardsDan Quote Link to post Share on other sites
Bot-Factory 602 Posted May 9, 2015 Author Report Share Posted May 9, 2015 @Stanf@pbsolution Your license has been resettet. I also added some additional monitoring to see if the hardware ID changes when you start the application again.I also sent you the Skype details of my developer. Please contact him. He will do a Netviewer session to analyze your problem. Kindest regardsDan @Stanf@pbsolution So far no one contacted my developer regarding the licensing issue. Does that mean the problem doesn't happen anymore? You should have received his contact details (skype) via PN from me? Please let me know if there is anything else I can do. If we don't hear from you, I have to assume that the problem is not longer happening, or not that urgent. Kindest regardsDan Quote Link to post Share on other sites
stanf 43 Posted May 9, 2015 Report Share Posted May 9, 2015 Sent him an email to discuss the problem because of the hours that I work arrainging a Skype call could be problematic, I have not heard back from him. Hopefully I can contact him today after I leave The mechanic shop Quote Link to post Share on other sites
Bot-Factory 602 Posted May 9, 2015 Author Report Share Posted May 9, 2015 An Email? Can't remember that I shared an email address? Dan Quote Link to post Share on other sites
stanf 43 Posted May 9, 2015 Report Share Posted May 9, 2015 A pm thru the boards Quote Link to post Share on other sites
Bot-Factory 602 Posted May 9, 2015 Author Report Share Posted May 9, 2015 Thats not his account. That was just a project account for the comm plugin. Hopefully you didn't send any details. Talk to me first if you want to use other communication ways :-) Dan Quote Link to post Share on other sites
Bot-Factory 602 Posted May 9, 2015 Author Report Share Posted May 9, 2015 Better to send a message via skype. Thats the only way to contact him directly at the moment. Dan Quote Link to post Share on other sites
mrwalt 34 Posted May 11, 2015 Report Share Posted May 11, 2015 Hi Dan, I was curious do you have an example of how to solve captchas with the XPath Builder Pro using the CBrowser as no matter what I try I have been hitting a wall? As an example in Ubot Studio Playground (http://ubotstudio.com/playground/captcha-form)how would you solve the captcha on this page within the CBrowser as the standard commandsdo not seem to work. This would mainly have to deal with the CBrowser Type Text (Element to type into) or if you areusing the CBrowser sSve Screenshot Element (Element to capture) as for some reason those fields do not take the XPath code. Is the best way to solve captchas with the advanced captcha plugin or can this be done with the standard built in Ubot captcha option? mrwalt Quote Link to post Share on other sites
Bot-Factory 602 Posted May 12, 2015 Author Report Share Posted May 12, 2015 Hi Dan, I was curious do you have an example of how to solve captchas with the XPath Builder Pro using the CBrowser as no matter what I try I have been hitting a wall? As an example in Ubot Studio Playground (http://ubotstudio.com/playground/captcha-form)how would you solve the captcha on this page within the CBrowser as the standard commandsdo not seem to work. This would mainly have to deal with the CBrowser Type Text (Element to type into) or if you areusing the CBrowser sSve Screenshot Element (Element to capture) as for some reason those fields do not take the XPath code. Is the best way to solve captchas with the advanced captcha plugin or can this be done with the standard built in Ubot captcha option? mrwaltIsnt that more a question for cbrowser plugin? Dan Quote Link to post Share on other sites
mrwalt 34 Posted May 12, 2015 Report Share Posted May 12, 2015 Hi Dan, Perhaps it may be. However, I was curious since I was trying this out within the XPath Builder Proif you had run across any difficulty in getting the captcha to work on any of your current or recentprojects? I'm just curious as I'm not putting this on you at all but just wondering if you had an example asI have tried just about everything? I know that time is precious and if you had an example I would be very grateful for your time andfor you sharing. If you don't that is okay as well. mrwalt Quote Link to post Share on other sites
Bot-Factory 602 Posted May 12, 2015 Author Report Share Posted May 12, 2015 Hi Dan, Perhaps it may be. However, I was curious since I was trying this out within the XPath Builder Proif you had run across any difficulty in getting the captcha to work on any of your current or recentprojects? I'm just curious as I'm not putting this on you at all but just wondering if you had an example asI have tried just about everything? I know that time is precious and if you had an example I would be very grateful for your time andfor you sharing. If you don't that is okay as well. mrwalt Unfortunately I didn't use Cbrowser plugin with Captchas so far. Dan Quote Link to post Share on other sites
mrwalt 34 Posted May 12, 2015 Report Share Posted May 12, 2015 Hi Dan, No problem at all, and I appreciate you getting back to me on that. mrwalt Quote Link to post Share on other sites
Aj. 2 Posted May 12, 2015 Report Share Posted May 12, 2015 Hi Dan,Sent you a support ticket yesterday morning but as of now no response so just in case the email got lost I’m posting here, hope you don’t mind...I purchased the video training and xpath builder last week as I needed to get into using xpath (I currently use regex but find it has it’s own set of problems at times).When I attempt to run the xpath builder the program fails with the message:XpathBuilderPro has stopped workingI have attempted to run this both as a user and as administrator.I have also downloaded the program again in case it was a bad download and re-installed but with the same error message.I'm running Windows 7 32 bit with Net version 4.5.50938 With 4 gigs of memory I’m running Kaspersky antivirus on the PC.In the support email I sent a screen shot of the error message but basically the program stops responding and locks up when attempting to register the software.I would appreciate your response to help me sort this problem out quickly if at all possible as I'm currently working on a project.Kind regardsArthur Quote Link to post Share on other sites
Bot-Factory 602 Posted May 12, 2015 Author Report Share Posted May 12, 2015 Hi Dan,Sent you a support ticket yesterday morning but as of now no response so just in case the email got lost I’m posting here, hope you don’t mind...I purchased the video training and xpath builder last week as I needed to get into using xpath (I currently use regex but find it has it’s own set of problems at times).When I attempt to run the xpath builder the program fails with the message:XpathBuilderPro has stopped working I have attempted to run this both as a user and as administrator.I have also downloaded the program again in case it was a bad download and re-installed but with the same error message. I'm running Windows 7 32 bit with Net version 4.5.50938 With 4 gigs of memory I’m running Kaspersky antivirus on the PC.In the support email I sent a screen shot of the error message but basically the program stops responding and locks up when attempting to register the software. I would appreciate your response to help me sort this problem out quickly if at all possible as I'm currently working on a project. Kind regardsArthurReply send to support ticket.Dan Quote Link to post Share on other sites
Aj. 2 Posted May 12, 2015 Report Share Posted May 12, 2015 Thanks Dan for updating me, Waiting for your licencing server update... Kind regardsArthur Quote Link to post Share on other sites
Bot-Factory 602 Posted May 12, 2015 Author Report Share Posted May 12, 2015 Thanks Dan for updating me, Waiting for your licencing server update... Kind regardsArthurPlease give it another try. Dan Quote Link to post Share on other sites
Bot-Factory 602 Posted May 14, 2015 Author Report Share Posted May 14, 2015 >>Important Information for existing Customers<< The reduce license server issues, we will roll-out a new update very soon!That update will calculate a new Hardware ID for the registration.Which is only based on hardware component that are not very likely to change.After you install the update, your license will be locked temporarily.You have to contact me so that I reset your license.Do NOT upgrade if you want to use the software immediately!But you can contact me via Skype or email to see if I'm available to reset your license directly after you upgrade! Unfortunately there is no way around this. Because the hardware ID for the registration will change.But afterwards I don't expect any additional licenses errors. So it will reduce the issues for you guys.I'll let you know as soon as the update goes online. But you always can cancel the update and do it later if you have urgent stuff to do with Xpath Builder PRO.Thanks a lot for your understanding. Kindest regardsDan Quote Link to post Share on other sites
Macster (UBotter Labs) 112 Posted May 14, 2015 Report Share Posted May 14, 2015 After you install the update, your license will be locked temporarily.You have to contact me so that I reset your license. thanks for the heads up but can't you simply reset all licenses to avoid any inconveniences ? Also, you said some time ago that the licensing will change to avoid machine lock !? Dan, locking end users to a machine is still ok though not even that is used anymore, at lest in our case here we all are developers and same as you most of us use multiple environments at the same time. Please change the licensing and move towards login like ubot studio, i doubt someone would ever give their login info. Quote Link to post Share on other sites
Bot-Factory 602 Posted May 19, 2015 Author Report Share Posted May 19, 2015 Update 1.2.7.3 is available now. Please check your email for instructions. If you update to 1.2.7.3 manually before you start the application, you can register again and everything will work within seconds.If you start the old version first, you will see an update popup. But your license will be locked automatically and I have to reset your account manually. In that case, please send an email to support@bot-factory.com with your license details. The license details are still the same. So please use the license key you received after purchase. Thanks a lot for your understanding. Kindest regardsDan Quote Link to post Share on other sites
drb 11 Posted May 21, 2015 Report Share Posted May 21, 2015 Just wanted to say that this is a brilliant tool 1 Quote Link to post Share on other sites
Bot-Factory 602 Posted May 22, 2015 Author Report Share Posted May 22, 2015 Update: Just a short update regarding licensing. The last update simplified the licensing, but we hear your feedback.A lot of you asked for a multi PC license. So we will do that very soon. Then you can use the Xpath Builder PRO license on two systems. One active copy at a time.Will update you as soon as it's readyIf you run into issues, or have ideas to improve the app, please let me know:support(ad)bot-factory.com Quote Link to post Share on other sites
sales 1 Posted May 25, 2015 Report Share Posted May 25, 2015 Hi Dan, Bought the program. I am trying to learn how to use it now. In my first attempt I was looking at a yellowpages.com search results page. Here is the URL:http://www.yellowpages.com/search?search_terms=Concrete+Contractors&geo_location_terms=Lancaster%2C+OH I wanted to scrape ONLY the listings on the page that are numbered (like 1. 2. 3. etc). Due to the overlapping structure of the HTML I cannot figure out what expression would find only the numbered listing results. Can you look at that page and tell me if it's possible and how to select them. Keep in mine I am a total newbie to xpath so really "dumb-down" your explanation for me. Thanks in advance for any help. If I should submit it to support let me know. I just thought maybe another newbie user would be stuck like me. sales Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.