vemomedia 7 Posted December 4, 2016 Report Share Posted December 4, 2016 Hey Darryl I purchased the gui hero a few weeks ago and I had it setup on 2 cpus then I took it off of my laptop and tried to add it to my new desktop but it wouldn't let me, I also went and deleted the license and all the files and folders on my laptop but had no luck. On top of that I resisted my license with the url provided in the folder but it still didn't reset it. Please I need help with this. My email I purchased it with is sagebwholesale@gmail.com Quote Link to post Share on other sites
darryl561 177 Posted December 4, 2016 Author Report Share Posted December 4, 2016 Hey Darryl I purchased the gui hero a few weeks ago and I had it setup on 2 cpus then I took it off of my laptop and tried to add it to my new desktop but it wouldn't let me, I also went and deleted the license and all the files and folders on my laptop but had no luck. On top of that I resisted my license with the url provided in the folder but it still didn't reset it. Please I need help with this. My email I purchased it with is sagebwholesale@gmail.comHi vemomedia, please try adding it to your new desktop again now. 1 Quote Link to post Share on other sites
vemomedia 7 Posted December 4, 2016 Report Share Posted December 4, 2016 ok trying now, one moment. Quote Link to post Share on other sites
vemomedia 7 Posted December 4, 2016 Report Share Posted December 4, 2016 ok so i did everything correctly but now its not even loading up Quote Link to post Share on other sites
vemomedia 7 Posted December 4, 2016 Report Share Posted December 4, 2016 this is what happens, itll load but nothing will show up, i even let it load for about 30 minutes to see if anything would change, also restarted my pc. im running windows 10 Quote Link to post Share on other sites
darryl561 177 Posted December 5, 2016 Author Report Share Posted December 5, 2016 this is what happens, itll load but nothing will show up, i even let it load for about 30 minutes to see if anything would change, also restarted my pc. im running windows 10Will PM you. Quote Link to post Share on other sites
Bawzee 0 Posted December 12, 2016 Report Share Posted December 12, 2016 Hi Darryl, I'd like to make a Wizard Style GUI, but rather than just go to another tab when clicking the button, I'd rather run a define that performs some data validation and then determines the tab that is displayed. It looked like you could do something like this in your other product by setting a refresh variable in a custom define to display another tab, but I'm not sure how to do it with GUI Hero. Any tips? Thanks,Bawzee Quote Link to post Share on other sites
darryl561 177 Posted December 13, 2016 Author Report Share Posted December 13, 2016 Hi Darryl, I'd like to make a Wizard Style GUI, but rather than just go to another tab when clicking the button, I'd rather run a define that performs some data validation and then determines the tab that is displayed. It looked like you could do something like this in your other product by setting a refresh variable in a custom define to display another tab, but I'm not sure how to do it with GUI Hero. Any tips? Thanks,Bawzee Hi Bawzee, as it is it could be done with this builder, but it would have to be done manually. I have been giving it some thought and I should be able to make a bot that will make, if not all the code changes necessary, then at least most of it.(this will be much easier than adding the option to GUI Hero). Give me a couple of days and I should hopefully have something to make it easy to create conditional tabs(perform some data validation and then determine the tab that is displayed). Cheers. Quote Link to post Share on other sites
cүвεя_נυηкιε 68 Posted December 13, 2016 Report Share Posted December 13, 2016 Hi Darryl, I'd like to make a Wizard Style GUI, but rather than just go to another tab when clicking the button, I'd rather run a define that performs some data validation and then determines the tab that is displayed. It looked like you could do something like this in your other product by setting a refresh variable in a custom define to display another tab, but I'm not sure how to do it with GUI Hero. Any tips? Thanks,Bawzee Hey Bawzee, .... firstly, your avatar totally rocks ! .. love that Southpark episode back on subject, .. While Darryl is working on the above bot he mentioned, I can offer a little help here as a lot of my bots/software does exactly what you mention, here is an extremely small example :https://youtu.be/EGTkSqeCbco You can then place any code/commands etc that want firing off when a tab is clicked to do whatever it is that you want,Or alternatively you could use a define to process data once clicked and then decide which tab its going to open or what is going to be displayed there. Hope that helps, good luck on your project CheersCJ 1 Quote Link to post Share on other sites
Bawzee 0 Posted December 13, 2016 Report Share Posted December 13, 2016 Give me a couple of days and I should hopefully have something to make it easy to create conditional tabs(perform some data validation and then determine the tab that is displayed). Darryl, This would be awesome and very much appreciated. Thanks,Bawzee Quote Link to post Share on other sites
Bawzee 0 Posted December 13, 2016 Report Share Posted December 13, 2016 Hey Bawzee, .... firstly, your avatar totally rocks ! .. love that Southpark episode back on subject, .. While Darryl is working on the above bot he mentioned, I can offer a little help here as a lot of my bots/software does exactly what you mention, here is an extremely small example :https://youtu.be/EGTkSqeCbco You can then place any code/commands etc that want firing off when a tab is clicked to do whatever it is that you want,Or alternatively you could use a define to process data once clicked and then decide which tab its going to open or what is going to be displayed there. Hope that helps, good luck on your project CheersCJ Cyber Junkie, Thanks for taking the time to make that vid. Much appreciated. I don't really want to display a tab upon automatically clicking a button though. I want the click to run a define that then determines the tab that is is displayed. So if I had a dropdown that had "no selection", 1,2, and 3 to choose from. I could then click a button that would run a define and display tab 1 if 1 was selected from the dropdown, or display tab 2 if 2 was selected, or display tab 3 if 3 was selected or if no selection is made would display tab 4 that would have a message that they must make a selection, etc. I'm needing the Define that runs to determine the tab that displays. Regards,Bawzee Quote Link to post Share on other sites
cүвεя_נυηкιε 68 Posted December 14, 2016 Report Share Posted December 14, 2016 Cyber Junkie, Thanks for taking the time to make that vid. Much appreciated. I don't really want to display a tab upon automatically clicking a button though. I want the click to run a define that then determines the tab that is is displayed. So if I had a dropdown that had "no selection", 1,2, and 3 to choose from. I could then click a button that would run a define and display tab 1 if 1 was selected from the dropdown, or display tab 2 if 2 was selected, or display tab 3 if 3 was selected or if no selection is made would display tab 4 that would have a message that they must make a selection, etc. I'm needing the Define that runs to determine the tab that displays. Regards,Bawzee Thanks, np mate, and lol, yes i guessed that is what you were looking for, but the point of the video was showing that you could place commands/functions/If statements where i placed the alerts, Or create a define with conditional statements that would then decide/select which of the Tab Defines were clicked I should have perhaps made it more clear, sorry about that I had a dropdown menu exactly how you mention that selected which section/tab was loaded in one of my old bots, I used javascript to get that to work (simple js vars and function linking a button to the dropdown) but expect it would be possible to use UBot commands to do it (advanced Ubot I think would be needed), perhaps something along the lines of :IF "dropdown = B" THEN Click Tab 2 .. and so on.. CheersCJ Quote Link to post Share on other sites
darryl561 177 Posted December 15, 2016 Author Report Share Posted December 15, 2016 I have been giving it some thought and I should be able to make a bot that will make, if not all the code changes necessary, then at least most of it.(this will be much easier than adding the option to GUI Hero). Give me a couple of days and I should hopefully have something to make it easy to create conditional tabs(perform some data validation and then determine the tab that is displayed). Cheers. Hi Bawzee, I ended up deciding to add the option to the builder. I have it added but I cannot get GUI Hero to compile now. I have tried many times but keep getting some "out of memory exception" error. I will try again after work tomorrow, but if I still can't get it to compile I will make a separate bot to convert the code to conditional tabs. Darryl. Quote Link to post Share on other sites
Bawzee 0 Posted December 15, 2016 Report Share Posted December 15, 2016 Hi Bawzee, I ended up deciding to add the option to the builder. I have it added but I cannot get GUI Hero to compile now. I have tried many times but keep getting some "out of memory exception" error. I will try again after work tomorrow, but if I still can't get it to compile I will make a separate bot to convert the code to conditional tabs. Darryl. Darryl, As always, your support is excellent and very much appreciated. Thanks,Bawzee Quote Link to post Share on other sites
darryl561 177 Posted December 16, 2016 Author Report Share Posted December 16, 2016 Update: Conditional Tabs This update is a little different. I added the new feature to GUI Hero, but cannot get it to compile now, so I made a small bot that will do the job just as well. This new feature(Conditional Tabs) makes it possible for your bot to process user entered data to determine which tab of your GUI to display. To use this new feature you will have to download GUI Hero Conditional Tabs here Please watch the video below(I apologize as the video is not very good), but it will show you the necessary steps to create conditional tabs.(although I stumble around in the video it is actually quick and easy to do ) Darryl. Quote Link to post Share on other sites
Bawzee 0 Posted December 16, 2016 Report Share Posted December 16, 2016 Update: Conditional Tabs This update is a little different. I added the new feature to GUI Hero, but cannot get it to compile now, so I made a small bot that will do the job just as well. This new feature(Conditional Tabs) makes it possible for your bot to process user entered data to determine which tab of your GUI to display. To use this new feature you will have to download GUI Hero Conditional Tabs here Please watch the video below(I apologize as the video is not very good), but it will show you the necessary steps to create conditional tabs.(although I stumble around in the video it is actually quick and easy to do ) Darryl. Thanks again, Darryl. Quote Link to post Share on other sites
tripros 16 Posted December 28, 2016 Report Share Posted December 28, 2016 Hi Darryl,When creating tool tips in latest version, some near the top of my bot are overlapping, hanging over the top (cut off), and also showing behind images near them. I attempted the fix from the previous gui editor video you made, but that does not seem to work with GUI hero. Can you advise how to resolve this? Thank you! Quote Link to post Share on other sites
darryl561 177 Posted December 28, 2016 Author Report Share Posted December 28, 2016 Hi Darryl,When creating tool tips in latest version, some near the top of my bot are overlapping, hanging over the top (cut off), and also showing behind images near them. I attempted the fix from the previous gui editor video you made, but that does not seem to work with GUI hero. Can you advise how to resolve this? Thank you! Hi tripros, I made a screencast to demonstrate. 1- To re-position the tool tip window change the margin-top value.2- Add z-index:900; to the tooltip code as demonstrated in the video to place it on top of the image. See screencast here: http://www.screencast.com/t/OV1EE98npD1 Quote Link to post Share on other sites
tripros 16 Posted December 29, 2016 Report Share Posted December 29, 2016 Hi tripros, I made a screencast to demonstrate. 1- To re-position the tool tip window change the margin-top value.2- Add z-index:900; to the tooltip code as demonstrated in the video to place it on top of the image. See screencast here: http://www.screencast.com/t/OV1EE98npD1 Thanks much Darryl! The z-index helped keep the tooltip on top, but regardless what I change the top margin to, it never moves. This has been the issue for a while and can't figure it out Anything you can suggest to resolve? Thanks again! Quote Link to post Share on other sites
darryl561 177 Posted December 29, 2016 Author Report Share Posted December 29, 2016 Thanks much Darryl! The z-index helped keep the tooltip on top, but regardless what I change the top margin to, it never moves. This has been the issue for a while and can't figure it out Anything you can suggest to resolve? Thanks again! I changed margin-top: -30px; to margin-top: 10px; and it moves the tooltip window. See image: Are you sure your changing the correct value? If yes can you send me your UI so I can see whats going on? Quote Link to post Share on other sites
tripros 16 Posted December 29, 2016 Report Share Posted December 29, 2016 I changed margin-top: -30px; to margin-top: 10px; and it moves the tooltip window. See image: Untitled.jpg Are you sure your changing the correct value? If yes can you send me your UI so I can see whats going on? Hi Darryl,Yes, image capture below. That's why it was strange when I would change the top margin and the tool tip wouldn't move, regardless of what I changed it to. Both in GUI Hero and in Ubot, never changed the location of the tool tip, however the z-index did put the tool tip in front of everything else. I'm PM'ing you the GUI now. Thanks much for your help! Quote Link to post Share on other sites
sbm128 12 Posted January 5, 2017 Report Share Posted January 5, 2017 any chance of a sale anytime soon? I've been eyeing this puppy for sometime now lol. Quote Link to post Share on other sites
darryl561 177 Posted January 6, 2017 Author Report Share Posted January 6, 2017 any chance of a sale anytime soon? I've been eyeing this puppy for sometime now lol. Hi sbm, sorry but I don't have any sales planned. Cheers. Quote Link to post Share on other sites
darryl561 177 Posted January 8, 2017 Author Report Share Posted January 8, 2017 I just bought GUI Hero it is not loading! first it said something about a FTP error..I added it to my firewall then it does not load at all.. How to fix. I have windows 10.. Thanks Hi stuna, I don't know what the "FTP error" would mean. Can you check if you have net framework 4.6.2 installed? Quote Link to post Share on other sites
darryl561 177 Posted January 9, 2017 Author Report Share Posted January 9, 2017 Cannot get the software to load.. Please issue refund. Thank you. Refund has been issued. Sorry I could not work out what the problem is. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.