Kreatus (Ubot Ninja) 422 Posted January 11, 2011 Report Share Posted January 11, 2011 Hi abs I tried to run that bot but it doesnt spinning my article.. The only output I see at the end is "true"... Quote Link to post Share on other sites
Abs* 12 Posted January 11, 2011 Report Share Posted January 11, 2011 hi - you need to navigate to a page that has java enabled if you are compiling the bot then its important that you have a folder called 'Misc' in the application folder I just tested and it works fine - heres a quick demo My link Quote Link to post Share on other sites
Psychotix 0 Posted January 12, 2011 Report Share Posted January 12, 2011 I heard using API entails additional charges per spin outside the yearly subscription? I believe it doesnt work when you're not paypal subscribed.That was the case then, dont know if its still that way. Quote Link to post Share on other sites
Guerrilla 19 Posted January 12, 2011 Report Share Posted January 12, 2011 With standard acount you get 250 spins per day through API. If you need more you need to contact JL Quote Link to post Share on other sites
Kreatus (Ubot Ninja) 422 Posted January 13, 2011 Report Share Posted January 13, 2011 Thanks abs its working now. Is there any other options like quality level: Better>Best>Good? I tried the bot but the spinning level is not that deep. Its 14% uniqueness only based on tbs. Quote Link to post Share on other sites
Guerrilla 19 Posted January 19, 2011 Report Share Posted January 19, 2011 Just spotted an error in my previous bot that only became apparent on big pages. the wait for command searches for the code at beginning of page returned from TBS API so ubot scrapes the page while its in middle of loading. This can cause all sorts of errors and crashes so I changed it to search for end of document and it works smooth again. If you get weird situations where formatting goes crazy and you get half of document missing this is the cause. Quote Link to post Share on other sites
Abs* 12 Posted January 20, 2011 Report Share Posted January 20, 2011 Thanks abs its working now. Is there any other options like quality level: Better>Best>Good? I tried the bot but the spinning level is not that deep. Its 14% uniqueness only based on tbs. HI kreatus I ran a few tests and heres what i got using a word count of 1700 and maximum synonyms of 5 Conentet quality set: uniqueness: Best 11%Better 22%Good 38% so the lower the quality then the more uniqueness you will get - of course this will also mean lower quality spun articles hope this helps Quote Link to post Share on other sites
3l337 0 Posted March 14, 2011 Report Share Posted March 14, 2011 Is there a way to spin to another format? {~} instead of the {|} for other services I would like to automate? Quote Link to post Share on other sites
JohnB 255 Posted March 14, 2011 Report Share Posted March 14, 2011 Bruteforce SEO, SENuke and a whole host of major software packages rely on third party services...it's not the worst thing you can add to an app! Quote Link to post Share on other sites
Abs* 12 Posted March 18, 2011 Report Share Posted March 18, 2011 Bruteforce SEO, SENuke and a whole host of major software packages rely on third party services...it's not the worst thing you can add to an app! Yeh its kind of cool actually - allowing users the ability to spin from the one tool - I though I would post here regarding the 5000 word count limit - the bot i have uploaded only send 5000 words at a time - however after testing some more - sometimes even with 5000 words the best spinner pulls a error stating that the word count is over 5000 - So I coded so that it would send only 4000 words at a time - still got the same error - Now I have coded so that the bot sends 1000 words at a time - Works a treat - To spin in a different format - then you could do a search and replace so that you search for | and replace with a ~ but of course you would do this with the replace command within ubot thanks abs Quote Link to post Share on other sites
Praney Behl 314 Posted May 5, 2011 Report Share Posted May 5, 2011 Has anyone tried to do this via the $navigate postdata command, it will be interesting to see if someone can have a simple example of the same. Quote Link to post Share on other sites
Guerrilla 19 Posted May 13, 2011 Report Share Posted May 13, 2011 I just ran into the 5000 word count issue. I am sending already spun articles to the API to add nested spins so I have to be careful as a break in wrong place would break whole article. Logic I am following is this: - Break article into a list seperating by $newline and removing blank entries.- Send each paragrpah one at a time- Re-assemble article A longer way about it but work. If I get time I will write some JS that will make this better. Quote Link to post Share on other sites
Praney Behl 314 Posted May 15, 2011 Report Share Posted May 15, 2011 I just ran into the 5000 word count issue. I am sending already spun articles to the API to add nested spins so I have to be careful as a break in wrong place would break whole article. Logic I am following is this: - Break article into a list seperating by $newline and removing blank entries.- Send each paragrpah one at a time- Re-assemble article A longer way about it but work. If I get time I will write some JS that will make this better. Hmm, a javascript sould actually do the trick. Nice one Guerrilla! Quote Link to post Share on other sites
Kreatus (Ubot Ninja) 422 Posted June 30, 2011 Report Share Posted June 30, 2011 Is there a way for this tbs bot to get the result without clicking the "Go" button? Thanks Quote Link to post Share on other sites
UBotBuddy 331 Posted June 30, 2011 Report Share Posted June 30, 2011 If by the "Go" button you mean UBots Start button then you can use "/auto" for the EXE file. Other than that, there is no way (inside of UBot that is). Quote Link to post Share on other sites
Kreatus (Ubot Ninja) 422 Posted June 30, 2011 Report Share Posted June 30, 2011 No. I mean the Go button that script generate.. Quote Link to post Share on other sites
Abs* 12 Posted June 30, 2011 Report Share Posted June 30, 2011 If by the "Go" button you mean UBots Start button then you can use "/auto" for the EXE file. Other than that, there is no way (inside of UBot that is). Hi - I think he means the GO button that TBS shows Quote Link to post Share on other sites
Kreatus (Ubot Ninja) 422 Posted June 30, 2011 Report Share Posted June 30, 2011 Hi - I think he means the GO button that TBS showsYes thats right I want to run it in the background.. Quote Link to post Share on other sites
Kreatus (Ubot Ninja) 422 Posted July 14, 2011 Report Share Posted July 14, 2011 Anyone successfully run this inside socket compartment? Quote Link to post Share on other sites
Gogetta 263 Posted July 25, 2011 Author Report Share Posted July 25, 2011 Anyone successfully run this inside socket compartment? Hey Kreatus. Actually the reason I wasn't able to get the navigate with post data to work properly. Is because the Nav With Post data will only work inside of socket compartments, and I didn't know this until Eddie told me. But to answer your question yes, TBS will work inside of socket compartments. Here is an example where I used sockets.The Best Spinner Api.ubot Quote Link to post Share on other sites
Kreatus (Ubot Ninja) 422 Posted July 25, 2011 Report Share Posted July 25, 2011 Gogetta thank you so much. This is exactly what I need! I don't really have any Idea how to use nav with post data until this sample. Quote Link to post Share on other sites
Bob The Builder 62 Posted August 12, 2011 Report Share Posted August 12, 2011 Anyone having luck with this lately? I tried it and it gives me false/invalid username password. I am sure both are right and I use this for other tools that calls the api. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.