Bliss 194 Posted January 9, 2014 Author Report Share Posted January 9, 2014 Hi, It sounds as if for some reason it is not writing the localip.txt to your Documents folder for the profile (user) your using in windows. You may want to check to see if the file exists in Documents? If it does not then I suggest you first do this to test. open a cmd window up in windows and then type this cd / cmd.exe /c ipconfig.exe > %USERPROFILE%\\Documents\\localip.txt Then check if that localip.txt file exists. This will tell you if its some kind of problem with your pc or permissions. Do let me know how you go. Jane Quote Link to post Share on other sites
firefox29 0 Posted January 9, 2014 Report Share Posted January 9, 2014 Jane thank you for the quick detailed response I really appreciate it, you rock!! Here is the error I got when trying to use the code on CMD.Do you know what I should do to fix this? Because from what I can tell when I right click on my my documents properties it's read only. And when I unclick it apply then hit ok, when I go back to it it's still read only. But when I right click the Computer Icon, go to secuirty and then permissions it says I have FULL Control.http://i7.photobucket.com/albums/y266/larrydalecarson/cmderror_zpsd05c2347.jpghttp://i7.photobucket.com/albums/y266/larrydalecarson/readonly_zps9e4a2f15.jpg Quote Link to post Share on other sites
wizeone17 7 Posted January 23, 2014 Report Share Posted January 23, 2014 Amazing Jane, Thank You!!!! Quote Link to post Share on other sites
gettingit 1 Posted December 7, 2014 Report Share Posted December 7, 2014 HeyI love this script.However, it sometimes gets stuck. Mainly 2 things happen HMA just will not connect and the little HMA icon bottom right is flashing. 2nd thing is that it says connected but has not actually connected. Is there away to set some kind of timeout that after 2 minutes if the IP has not changed it moves on to the rest of my script...Obviously the script wont work but once it finishes that run it will start from the beginning again.Also, sometimes HMA will just disconnect - is there a way to ensure it is connected first before clicking the change IP - if connected it just changes IP. If not connected it just clicks connect? (cant do both because HMA only allows me to change every 5 minutes on my 10 license pack)I'm sorry Im complete newb and have spent hrs trying to figure this outThanks in advance 1 Quote Link to post Share on other sites
Mohammad 0 Posted November 19, 2015 Report Share Posted November 19, 2015 Thanks, but showing error, how to solve this, http://prntscr.com/94ckcf Quote Link to post Share on other sites
spa3212 1 Posted January 27, 2016 Report Share Posted January 27, 2016 Hey I love this script. However, it sometimes gets stuck. Mainly 2 things happen HMA just will not connect and the little HMA icon bottom right is flashing. 2nd thing is that it says connected but has not actually connected. Is there away to set some kind of timeout that after 2 minutes if the IP has not changed it moves on to the rest of my script... Obviously the script wont work but once it finishes that run it will start from the beginning again. Also, sometimes HMA will just disconnect - is there a way to ensure it is connected first before clicking the change IP - if connected it just changes IP. If not connected it just clicks connect? (cant do both because HMA only allows me to change every 5 minutes on my 10 license pack) I'm sorry Im complete newb and have spent hrs trying to figure this out Thanks in advance Very good question, need help on this. Quote Link to post Share on other sites
Heiio 5 Posted July 13, 2016 Report Share Posted July 13, 2016 HMA and Ubots are not in love...I prefer to use free fresh proxies or paid shared proxies. Quote Link to post Share on other sites
bhat 0 Posted May 19, 2017 Report Share Posted May 19, 2017 HMA and Ubots are not in love...I prefer to use free fresh proxies or paid shared proxies. I am currently using HMA because I need a solution that changes the IP address every few minutes. I am also running several bots not just one who needs to change the IP address every time the script is complete and when it loops back to the beginning. What is a paid/free proxy solution that will do this? I saw some proxy places selling batches of like 300, but that will only be good for 300 cycles of my script then I need to buy a new batch of thousands of IP addresses every time? Any tips on how to do this as right now I'm just using HMA with ubot Quote Link to post Share on other sites
bhat 0 Posted May 19, 2017 Report Share Posted May 19, 2017 Hey I love this script. However, it sometimes gets stuck. Mainly 2 things happen HMA just will not connect and the little HMA icon bottom right is flashing. 2nd thing is that it says connected but has not actually connected. Is there away to set some kind of timeout that after 2 minutes if the IP has not changed it moves on to the rest of my script... Obviously the script wont work but once it finishes that run it will start from the beginning again. Also, sometimes HMA will just disconnect - is there a way to ensure it is connected first before clicking the change IP - if connected it just changes IP. If not connected it just clicks connect? (cant do both because HMA only allows me to change every 5 minutes on my 10 license pack) I'm sorry Im complete newb and have spent hrs trying to figure this out Thanks in advance I am having the same problem here. Sometimes HMA gets stuck on connecting and so I check the next day and my script is stuck as well because of this. Anyone find a solution for this? Quote Link to post Share on other sites
uBotForMe 2 Posted May 19, 2017 Report Share Posted May 19, 2017 I am having the same problem here. Sometimes HMA gets stuck on connecting and so I check the next day and my script is stuck as well because of this. Anyone find a solution for this? Try to use this process:- shell("\"C:\\Program Files\\HMA! Pro VPN\\bin\\HMA! Pro VPN.exe\" -disconnect") wait(3) shell("\"C:\\Program Files\\HMA! Pro VPN\\bin\\HMA! Pro VPN.exe\" -connect") wait(hmawait) Quote Link to post Share on other sites
bhat 0 Posted May 19, 2017 Report Share Posted May 19, 2017 (edited) Try to use this process:- shell("\"C:\\Program Files\\HMA! Pro VPN\\bin\\HMA! Pro VPN.exe\" -disconnect") wait(3) shell("\"C:\\Program Files\\HMA! Pro VPN\\bin\\HMA! Pro VPN.exe\" -connect") wait(hmawait) Thanks uBotforme, I just wanted to make sure first because my script is set on a loop. The beginning of the loop is original poster Bliss's code on page 1 of this forum thread and then my script begins. So do I just add this shell code at the very end of my script and it should solve any problems if HMA get stuck? And it won't interfere with Bliss's code at the restart of my script? Also, is there a way to make this -disconnect -connect code only happen when HMA is stuck on connecting or disconnected? Instead of automatically disconnecting and connecting every time at the end of the script even though HMA is working fine (which is probably 80% of the time). Edited May 19, 2017 by bhat Quote Link to post Share on other sites
bhat 0 Posted May 20, 2017 Report Share Posted May 20, 2017 I am getting an error with the line: hma(hmawait) Also, it interefered with Bliss's code when it loops back to it. It says localip.txt cannot be accessed because it is being used by another process. Quote Link to post Share on other sites
uBotForMe 2 Posted May 20, 2017 Report Share Posted May 20, 2017 I am getting an error with the line: hma(hmawait) Also, it interefered with Bliss's code when it loops back to it. It says localip.txt cannot be accessed because it is being used by another process. HiWhat code you are using? and Yes I made mistake in this line:-wait(hmawait) It should be:- wait(#hmawait)You can define wait time seconds in UI using this:- ui text box("Enter wait time",#hmawait)HMA takes about 7-10 seconds to connect when using "PPTP" protocol. I highly recommend you to use PPTP protocol because it will hardly stuck 1 time in 1000 loops and way better than OpenVPN. Quote Link to post Share on other sites
Reinbo 2 Posted October 13, 2018 Report Share Posted October 13, 2018 how to change ip for new version HMA v4.3 xxx, I tried it like this doesn't work shell("C:\\Program Files (x86)\\HMA! Pro VPN\\Vpn.exe -changeip") Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.